CNC profile machining equipment · Manufacturer

Configure CNC drilling & milling equipment around your profile process

Start with the material and the operations you need, then decide whether fiber laser cutting or heavy-duty machining is required. Stroke is customized to your workpiece length. We help industrial buyers evaluate operations, cycle time, fixturing and stroke before quotation.

Request an assessment Start selecting
WGT-3000G 4-Axis CNC Fiber Composite Machining Center
WGT-3000GLight-alloy precision · laser + milling combined
  • Milling / drilling / chamfering / tapping in a single setup
  • X-axis stroke 3000–6500 mm, extended to order
  • Exported to the United States, Mexico and beyond

SELECTION PATH

Two steps to the right machine

Start with the material, then confirm the operations you need. Stroke can be customized to your workpiece length, so it is not used to determine the model. The result is a preliminary recommendation — the final configuration must be evaluated against your drawings, operations and capacity targets.

01

What material do you machine?

02

Which operations do you need?

Recommended model
Select a material and the required operations

This path is for preliminary guidance only. Fixturing, tool magazine and control system must be confirmed against the profile section, operations and capacity targets.

PRODUCT ARCHITECTURE

Five machines for profile machining and battery dismantling

Light-alloy precision work, general steel profiles, heavy-duty large parts, and the dismantling and tab milling of retired battery packs — choose the model by material and operations. Stroke is customized to your workpiece length. Open a model for full specifications.

WGT-3000G 4-Axis CNC Fiber Composite Machining Center
WGT-3000G

4-Axis CNC Fiber Composite Machining Center

Light-alloy precision · laser + milling combined

Suitable for industrial aluminium, copper and other light alloys, as well as U-PVC profiles. Fiber cutting, milling, drilling and chamfering are completed on a single setup, and the tilting table handles any angle from -90° to +90°.

Full specifications

Core advantages

  • Fiber cutting combined with precision milling — roughing and finishing in one machine
  • Tilting from -90° to +90°, multi-face machining in one setup
  • Stress-relieved high-rigidity bed with imported core transmission components
  • Advanced industrial CNC system supporting online and offline programming

GLOBAL DELIVERY

Shipped from Jinan to production lines worldwide

Machines leave our Jinan works in China and are shipped by sea to markets in North America, Latin America, Europe, the Middle East, South Asia, Southeast Asia, Oceania and Africa. Commissioning is carried out on site by our engineers, with operator training included.

Global delivery map (schematic)
Manufacturing base Delivery market

Swipe sideways on mobile to see the full map

Schematic map for reference only — it indicates delivery regions and is not a statement of national or territorial boundaries.

MACHINE DETAILS

Machine details

Hover a model name and the matching close-ups appear below — beds, spindles, tool magazines, fixturing and control systems. Click an image to enlarge; full specs are on each model page.

Combined laser head and milling spindle
Combined laser head and milling spindleLight-alloy precision
Automatic tool magazine
Automatic tool magazineLight-alloy precision
Profile machining in progress
Profile machining in progressLight-alloy precision
Mobile control console
Mobile control consoleLight-alloy precision
Full specifications

APPLICATION & SUPPORT

From selection assessment to commissioning

We coordinate application assessment, model selection, fixturing, quotation, delivery and after-sales communication for industrial buyers.

Rail transitLong profiles for car bodies and frames
New energy vehiclesBattery trays and body structures
Liquid cooling partsCold plates and flow-channel aluminium parts
Windows and curtain wallsWindow frames and mullions
AerospacePrecision machining of lightweight structures
ShipbuildingHull stiffeners and cabin frames
Solar photovoltaicsPV frames and mounting profiles
Aluminium formworkVolume machining of construction formwork
Application assessmentConfirm model and fixturing by material, length and operations
Custom configurationStroke, table, magazine and fiber cutting configured to order
Installation & commissioningOn-site commissioning and operator training, typically 1–2 days
After-sales & warranty12-month warranty from acceptance, long-term parts supply and support

FAQ

Frequently asked questions

The WGT-3000G suits industrial aluminium, copper and other light alloys as well as U-PVC profiles. The WGTA-4500 and WGTB-6500 use BT30 / BT40 spindle tapers and process steel profiles, aluminium profiles, aluminium-wood composites and copper profiles.
Standard X-axis strokes are 3000 mm (WGT-3000G), 4500 mm (WGTA-4500) and 6500 mm (WGTB-6500). Longer workpieces can be handled with extended strokes built to order, evaluated against workpiece length, fixture layout and shop floor conditions.
WGT-3000G: positioning accuracy X/Y ±0.05 mm, Z ±0.02 mm, repeatability ±0.05 mm. WGTA-4500: X ±0.05 mm, Y/Z ±0.02 mm, repeatability ±0.01 mm. WGTB-6500: X ±0.05 mm, Y/Z ±0.02 mm, repeatability ±0.02 mm. The bed is stress-relief annealed and paired with imported linear guides, ball screws and servo systems.
It is optional. With fiber cutting fitted, the WGT-3000G can first remove most of the allowance by laser as roughing, then switch to precision milling — noticeably faster for complex shaped slots. If you only need milling, drilling, chamfering and tapping, a configuration without the laser can be selected.
Yes. X-axis stroke, table length, fixture type, tool magazine configuration and optional fiber cutting can all be customized to order, confirmed after evaluation against drawings, operations and capacity targets.
Power: 3-phase 380 V / 50 Hz. Air supply: 0.6–0.9 MPa. Ambient temperature 5–40 °C (24-hour average not above 35 °C), relative humidity 30–75%, vibration below 0.5 G. Independent grounding with resistance under 10 Ω.
Our engineers travel to your factory to install, commission and train operators, typically within 1–2 days. Please notify us within 30 days of arrival so we can schedule commissioning, and prepare three-phase power, air supply, and workpiece material, tooling and fixtures for trial machining.
The warranty runs for 12 months from the date of acceptance. During this period repairs and parts damaged by quality issues are free of charge. After expiry we continue to supply parts and provide technical consultation and on-site repair. Failures caused by force majeure, improper operation or maintenance, or repair by unauthorized parties are excluded.
The machines use a Syntec (Taiwan, China) CNC system with a friendly HMI. Professional CAM software enables 3D visual programming with online and offline support, so a single operator can handle routine machining. Operator training is provided during commissioning.
Please provide the workpiece material and section size, workpiece length, required operations (milling / drilling / chamfering / tapping / fiber cutting), your current machining method, and your capacity and delivery expectations. Drawings help us evaluate fixturing and stroke more accurately.
The machining zone of the WGTC-3027 is fully enclosed with isolation doors and continuous extraction, separating the hazard zone from operators during machining and emergency handling. If a pack ignites, the table travels to the blast-proof station and is sprayed with water immediately; the lifting platform then lowers the pack fully into a 304 stainless steel water tank until the flames are out and the temperature drops, after which it returns to the load/unload station. The station uses smoke and temperature sensors and can start handling within 3 seconds; tank, lifting platform and enclosure are part of the standard supply.
The WGTC-3027 runs at roughly 20 minutes per pack for milling, including loading/unloading and program touch-off. It handles packs from 800 to 2500 mm long, 600 to 1600 mm wide and 100 to 500 mm high, with a maximum load of 3000 kg. Real throughput also depends on the number of tab cuts, milling allowance, tooling and shop-floor logistics — evaluate it against your shift target and a trial cut.
Compatibility is defined by size: 800–2500 mm long, 600–1600 mm wide and 100–500 mm high, covering mainstream passenger and commercial vehicle packs. Tab positions, structural adhesive and tray design vary between brands, so a sample or drawing is needed to evaluate fixturing and programs. The WGTC-3027 reserves interfaces for CCD, 3D vision and laser line scanning to extend positioning and inspection later.

REQUEST AN ASSESSMENT

Tell us about your machining conditions

Please share the workpiece material, length, required operations and your current machining method. We will evaluate the complete machine and fixturing solution before quotation.

  • Workpiece material, section size and length
  • Required operations: milling / drilling / chamfering / tapping / fiber cutting
  • Current machining method, capacity targets and expected delivery

Submitting creates an email draft you can review and edit before sending.

Your email app did not open? Please send directly to: omexlasercnc@gmail.com
  • Hotline：+86 176 5051 3003
  • Email：omexlasercnc@gmail.com
  • WhatsApp / WeChat：+86 176 5051 3003
  • Address：Room 525, Tower B, Country Garden Phoenix Center, 77 Shunyi Road, Shunhua Street, Jinan Area of China (Shandong) Pilot Free Trade Zone
  • Business hours：Mon – Sat, 8:30 – 17:30 (GMT+8)