08

OMEX-A3000-2W

Twin-Head High-Precision CNC Machining Centre (BT30)

Twin BT30 heads · synchronized or independent

Two independent Z axes and BT30 spindles on a single bed. Heads can run synchronously or work on separate zones to cut cycle time on long profiles. Stroke, fixturing, tool magazines and controls are configured to order against your section, operations and throughput target.

Get a Quote Technical data
OMEX-A3000-2W Twin-Head High-Precision CNC Machining Centre (BT30)

KEY FEATURES

Key features

01

Two independent heads, synchronized or working on separate zones

02

Parallel machining on long profiles for a shorter cycle time per part

03

BT30 spindle taper balancing rigidity and tool-change speed

04

Stroke, fixturing and magazines configured to the workpiece and output

TECHNICAL DATA

Technical data

Structure & spindle
Number of heads2 independent Z axes / spindles
Spindle taperBT30
Machining modeSynchronized / independent zones
Travel & configuration
X-axis travel3000 mm class, built to workpiece length optional
FixturingConfigured to section and operations
Tool magazineIndependent magazines per head, capacity to order
CNC systemIndustrial CNC with online/offline programming
Note
Technical dataBuilt to order; final values per technical agreement

Specifications are taken from this model's factory technical data sheet. Custom stroke, fixturing and tool magazine configurations are subject to the final technical agreement.

The X-axis travel of every model can be extended to your workpiece length.

CONFIGURATION

Standard configuration

Two independent Z axes with BT30 mechanical spindles

Independent tool magazines and tool setters per head

High-precision linear guides and ball screws

Fully digital AC servo drives

Pneumatic clamping fixtures configured to the section

Guarding, chip removal and spray cooling

When supply is short, components from other brands may be used as substitutes, with no difference in quality or grade.

COMPONENT BRANDS

Key component brands

BrandOriginApplication
SYNTECTaiwan, ChinaCNC system / servo drives
PMI / YYCTaiwan, ChinaLinear guide / rack
To be confirmed—Spindles, magazines and electricals per final configuration

FAQ

Frequently asked questions

The OMEX-3000G suits industrial aluminium, copper and other light alloys as well as U-PVC profiles. The OMEX-A4500 and OMEX-B6500 use BT30 / BT40 spindle tapers and process steel profiles, aluminium profiles, aluminium-wood composites and copper profiles.
Standard X-axis strokes are 3000 mm (OMEX-3000G), 4500 mm (OMEX-A4500) and 6500 mm (OMEX-B6500). Longer workpieces can be handled with extended strokes built to order, evaluated against workpiece length, fixture layout and shop floor conditions.
OMEX-3000G: positioning accuracy X/Y ±0.05 mm, Z ±0.02 mm, repeatability ±0.05 mm. OMEX-A4500: X ±0.05 mm, Y/Z ±0.02 mm, repeatability ±0.01 mm. OMEX-B6500: X ±0.05 mm, Y/Z ±0.02 mm, repeatability ±0.02 mm. The bed is stress-relief annealed and paired with imported linear guides, ball screws and servo systems.
It is optional. With fiber cutting fitted, the OMEX-3000G can first remove most of the allowance by laser as roughing, then switch to precision milling — noticeably faster for complex shaped slots. If you only need milling, drilling, chamfering and tapping, a configuration without the laser can be selected.
Yes. X-axis stroke, table length, fixture type, tool magazine configuration and optional fiber cutting can all be customized to order, confirmed after evaluation against drawings, operations and capacity targets.
Power: 3-phase 380 V / 50 Hz. Air supply: 0.6–0.9 MPa. Ambient temperature 5–40 °C (24-hour average not above 35 °C), relative humidity 30–75%, vibration below 0.5 G. Independent grounding with resistance under 10 Ω.

Other models

REQUEST AN ASSESSMENT

Tell us about your machining conditions

Model of interest：OMEX-A3000-2W · Twin-Head High-Precision CNC Machining Centre (BT30)

  • Workpiece material, section size and length
  • Required operations: milling / drilling / chamfering / tapping / fiber cutting
  • Current machining method, capacity targets and expected delivery

Submitting creates an email draft you can review and edit before sending.

Your email app did not open? Please send directly to: omexlasercnc@gmail.com
  • Hotline：+86 176 5051 3003
  • Email：omexlasercnc@gmail.com
  • WhatsApp / WeChat：+86 176 5051 3003
  • Address：Room 525, Tower B, Country Garden Phoenix Center, 77 Shunyi Road, Shunhua Street, Jinan Area of China (Shandong) Pilot Free Trade Zone
  • Business hours：Mon – Sat, 8:30 – 17:30 (GMT+8)